Sitemap
A list of all the posts and pages found on the site. For you robots out there is an XML version available for digesting as well.
Pages
Posts
Sarawak International Dragon Boat Regatta 2024 
Published:
Representing HKU won two champions : International Premier Open 12’s, International Premier Mix 20’s 
PIERS2024 in Chengdu 
Published:
(from left) with Dr. Sichao Qu, Prof. Nicholas X. Fang, Dr. Erqian Dong 
portfolio
Dielectric Properties of Twisted Bilayer Graphene
Collaborated with Prof. Renjie Zhou, CUHK
Multiphysics Multiscale Laser-induced Ultrasound Modeling
Self-motivated Project
Work Function Tunning of 4H-SiC by Atomic-level ZnO interlayer
Collaborated with Prof. Yanxia Cui, TYUT
publications
Ab initio calculation of electron temperature dependent electron heat capacity and electron-phonon coupling factor of noble metals
Published in Computational Materials Science, 2022
The electron heat capacity Ce and electron–phonon coupling factor Ge-ph are obtained; The detailed factors that influence Ce and Ge-ph are analyzed; Attention should be paid to the impacts of electron density of states on Ce and Ge-ph.
Recommended citation: Yongnan, Li., Pengfei, Ji. (2022). "Ab initio calculation of electron temperature dependent electron heat capacity and electron-phonon coupling factor of noble metals." Computational Materials Science. 202, 110959.
Download Paper
Achieving Peta-Ohm Resistance for Semi-Insulating 4H-SiC Devices by Atomic Layer Deposition
Published in arXiv, 2024
Preprint version of cooperative work with Prof. Yanxia Cui
Recommended citation: Yuying, Xi., Helios Y., Li., Guohui, Li., et al. (2024). "Achieving Peta-Ohm Resistance for Semi-Insulating 4H-SiC Devices by Atomic Layer Deposition." arXiv. 2407.10208.
Download Paper
talks
Ab Initio calculation of Electron Temperature Dependent Heat Capacity and Electron Phonon Coupling Factor of Noble Metals
Published:
Noble metal nanoparticles show fantastic catalytic property in both scientific research and industrial applications. To generate nanoparticles via femtosecond laser ablation is gaining increasing interest in the past decades. In this presentation, a serials of ab initio calculations for four typical noble metals (gold, palladium, iridium, and rhodium) are to be delivered, focusing on three pivotal parameters in the two-temperature model (electron heat capacity, phonon heat capacity, and electron-phonon coupling factor), which describes the thermal repsonse of the electron subsystem to the femtosecond laser irradiation and the electron-phonon coupled energy transfer between the electron subsystem and the lattice subsystem. In respect of the electron subsystem, by increasing electron temperature as the deposition of laser energy in the electron subsystem, the electron transitions from d orbitals to sp orbitals and from sp orbitals to d orbitals are observed for metals with fully and partially filled d block. It is highlighted that the change of electron density of states and Fermi-Dirac distribution function with the increasing electron temperature are the major factors affecting the electron heat capacity and electron-phonon coupling factor. In respect of the lattice subsystem, electron temperature shows little contribution to phonon heat capacity in spite of conspicuous impact on phonon density of states. Debye model and Debye temperature are tools to investigate thermodynamic properties straightforwardly, the calculation results reveal that Debye temperature as a disparate function of electron temperature for the investigated metals. In summary, this presentation conducts an insight attempt to explain the influence of femtosecond laser irradiation on noble metals, providing a ground of fabricating noble metal nanoparticles with femtosecond laser theoretically.
Ultrafast Electronic Dynamics Observation in Energy Storage Materials
Published:
Thin film electrodes are able to enhance energy storage performance by their microscale thickness while ensuring mechanical flexibility. Transition metal oxides are typical electrode materials with unique properties on charge carriers, among them tricobalt tetraoxide possesses a band gap of near-infrared excitation, widely applied in photocatalysis, optoelectronics, and so forth. However, the lack of research on charge carrier dynamics and photo-accelerated charging of tricobalt tetraoxide restricts the application of this class of materials for thin film electrode energy storage devices. This work summarized the basic concept of absorption spectroscopy and raised one scheme for building a transient absorption spectrum experimental setup. Afterward, steady-state and transient absorption spectroscopy were employed to identify the optical transition in tricobalt tetraoxide, then photoexcited free charge carriers and their lifetime was analyzed. Based on transient spectroscopy, all free charge carriers observed had a long lifetime of >10 ns, surpassing the general value. It is inferred that the abnormally long charge carrier lifetime is due to small polaron formation by the observed phenomenon and literature research. In addition to the experimental findings, first principles calculation was implemented to validate the result by steady-state absorption spectrum, and deviations of the calculated absorption spectra from the experiment caused by low calculation accuracy and the implementation of Hubbard correction were found, the calculation result still plays a role of guidance to the experiments. Based on the small polaron formation observed in the experiments of tricobalt tetraoxide thin film, this work proposes the application potential of tricobalt tetraoxide thin film electrode for photo-accelerated charging-energy storage devices and prospects the future research directions.
Multiscale Multiphysics Simulation Model of Laser-Induced Ultrasonic Energy Conversion
Published:
With rapid advancement on pushing the resolution and strong optical contrast at desired imaging depth of laser-induced ultrasound, compact and miniature photoacoustic imaging and diagnosis systems are emerging as a promising functional imaging technology for modern biomedical applications. In this context, a structured absorber medium exposed by laser excitation increases their temperature and launches a pressure wave that propagates as ultrasound emission through the subject under inspection. In contrast to direct laser excitation of the testing objects, this structured absorber allows generation of ultrasound emission at higher central frequency and minimizing the variance of ultrasound intensity injected in biological tissue, therefore enabling more accurate and reliable quantitative measurements. However, due to the complex interaction of photothermal conversion and photoacoustic waves involved, the signal pathway of laser-induced ultrasound emission is not fully established. There is a critical need to elaborate the energy conversion process spanning from electronic scale, atomistic scale, to microscale, in order to properly control the laser dose and design structured absorbers. To unravel the hidden physical pictures, we propose a multiscale multiphysics simulation model for capturing the interconnected process of laser-induced ultrasonic energy conversion. As the first and foremost task, we focus on the optical, plasmonic, and thermal responses of metallic and semiconductor particles to laser irradiation. Understanding of this process unveils the energy conversion and heat transport during and after photoexcitation of these materials. The developed simulation model is used to illustrate and evaluate the advantages of the widespread carbon materials-based laser-induced ultrasonic transducers, while also aiding in the comprehension of the process of light-matter interaction. As a result, our findings of this research can lead to quantifiable metrics and design guidelines of novel high-performance laser-induced ultrasonic transducers, ultimately benefiting modern biomedical diagnosis.
Metal-Semiconductor Contact Fermi Level Tunning Engineering
Published:
The ubiquitous metal-semiconductor contacts in semiconductor devices play the dominant role in device performance. They are as influential as semiconductor materials themselves. Two key factors affected by metal-semiconductor contact are the contact resistance and charge carrier barrier at the interface. These factors determine the electrical characteristics and efficiency of devices directly. The energy balance process after contact results in either facilitating or blocking effects on charge carrier transport across the interface, depending on the energy difference of the Fermi levels between two sides. This implies that adjusting the Fermi level before contact offers the potential to customize contact characteristics, allowing for larger flexibility in device fabrication and performance enhancement. In this talk, I will introduce the well-established theoretical models for evaluating metal-semiconductor contact, providing guidance for modifying and manipulating the material properties to design and improve device performance. Within this framework, I will discuss several selected works that demonstrated the engineering of Fermi level tunning through theoretical predictions and experimental validations. The successful manipulation of metal-semiconductor contacts propounds an effective strategy for designing ideal electronic devices with a better understanding of per se of the contact phenomenon.
teaching
MECH4411 Teaching Assistant
Undergraduate course, The University of Hong Kong, Department of Mechanical Engineering, 2023
MECH4411 Heat Transfer, by Prof. Nicholas X. Fang
MECH4411 Teaching Assistant
Undergraduate course, The University of Hong Kong, Department of Mechanical Engineering, 2024
MECH4411 Heat Transfer, by Prof. Nicholas X. Fang